Skip to content

David

Default color brown color green color red color blue color
KMLA MARINE TEC ENGINEERING LTD
You are here: Home arrow Engines arrow pumal
Skip to content
Ford PUMA 2.4 litre 4 cylinder marine diesel PUMA L
Ford PUMA 2.4 litre 4 cylinder marine diesel PUMA L - 60HP at 2800 RPM PUMA N - 78HP at 3900 RPM
 

Turbo version illustrated

 
 
 
 
 
Design Features
Engine
Well proven, normally aspirated. Suitable for shaft, sterndrive or jetpump installations. Genset and power pack versions also available
Fuel system
Direct injection for good starting, with pre-set minimum and maximum speed control.
Electronic speed control available.

Low fuel consumption
Precise fuel management system includes an automatic timing advance and torque control unit,
to control maximum fuel delivery throughout the speed range.
Reliability
Meets high reliability and durability demands. Aluminium cylinder head with optimised gas flow and 16 valves, chain driven by 2 camshafts.
 
Serviceability
Low maintenance requirements, 7 rib Poly-Vee belt for low slippage.
Easy access to all serviceable components.
Ford parts support throughout Europe and 170 countries worldwide.
 
Standard items
Jabsco sea water pump.
Bowman combined heat exchanger and water cooled manifold.
Engine oil cooler in fresh water circuit (not XLD/FSD LP/MP engines).
Water injected exhaust outlet.
Engine mount brackets with adjustable rubber mounts

Transmission attachment parts.
Speed control cable connection.
Hot test after marinisation.
Owner's handbook .
12V electric starter.
12V alternator.
Low oil pressure switch.
Over temperature switch.
Dual tone alarm sounder
Optional items
Geabox oil cooler
Gear control cable connections
Dual station control connections
Calorifier connections
Sump pump kit
Heavy flywheel
Auxilliary fuel filter
All-speed governing in lieu of power/torque
Armoured feed and return hoses
"Inland waterways" fuel pipes
On-board spares kit
Workshop manual
Parts identification manual
Instrumentation and electrical options
Start/run switch, warning lights and 4M harness Tachometer (with hours), hour meter, temperature, oil pressure, battery voltage, fuel, rudder angle and gearbox pressure gauges, standard or custom made instrument panels
High output alternator, Sterling "smart" alternator control, load split relay, 4M harness extension, intake blockage sensor, fly-bridge alarm & re-start panel, battery cable kit
 
Variation to standard specifications and extra optional items for this engine type
Additional standard items
Electric run/stop control
High-rise exhaust
Full power dynomometer test
Optional items
“Dieselise” package for stern drive use
Boost pressure gauge
 
PUMA N and L
List price
£4425
Boatbuilder price

£4023
Price for 'bobtail' engine, ready for gearboxes, sterndrives or jets
Engine specifications may vary as improvements are introduced
Lancing Marine reserve the right to alter specifications without notice
All prices are quoted net of VAT (value added tax) which will be added at the appropriate rate
 
Dimensions
Specifications are subject to change without notice and are not for engineering purposes

Dimensions J and K can be found in the gearbox specifications

 

Power output
 
Detailed specification
Engine model PUMA L PUMA N
Power Maximum H.P. 60 78
RPM Maximum 2800 3900
Torque Maximum Nm 150
Cubic capacity, litres 2.4
Bore, mm 89.9
Stroke, mm 94.6
Aspiration Natural
Engine rotation Anti-clockwise viewed from rear
Compression ratio 19:1
Electrics 12v earth return Alt, Amps 55
optional 12v insulated Alt, Amps 105
Minimum battery size 1x85 AH 12 volt
Minimum starter cable, length=size 0.6M = 40mm2/1.2M = 70mm2
Engine operating angles
Engine front down (degrees) 0
Sideways (degrees) 15
Engine front up (degrees) 15
Engine model PUMA L PUMA N
Max Fuel Consumption, lit/hour 11 13
Fuel feed diameter, ins (mm) 5/16" (8)
Fuel return diameter, ins (mm) 5/16" (8)
Exhaust diameter, ins (mm) 2" (50)
Water intake diameter, ins (mm) 7/8" (22)
Coolant capacity, lit 28
Oil capacity, lit 12
Weight, Engine, Kg 230 230
Guide to sterngear
Max. Prop. dia. for gear ratio 1,5:1 ins 15" 13"
Min. Shaft Dia. St. St. ins (mm) 1" (25) 1" (25)
Speed range for this ratio 11-22 15-25
Max. Prop. dia. for gear ratio 2:1 19" 16"
Min. Shaft Dia. St. St. ins (mm) 1 1/4" (32) 1 1/4" (32)
Speed range for this ratio 7-16 8-20
Max. Prop. dia. for gear ratio 3:1 23" 20"
Min. Shaft Dia. St. St. ins (mm) 1 3/8" (35) 1 3/8" (35)
Speed range for this ratio 5-10 6-15
 
Options for all engines - prices in £ Sterling Options for these engines - prices in £ Sterling
Sump Pump Kit £50
"All-Speed" governing in lieu of "Power/Torque" £250
Sterling "Smart" alternator control, connected £150
High output alternator in lieu of standard (as available)
Load split relay set up to 70 A £25
over 20 A £40
Auxiliary fuel filter with water drain (metal bowl £8 extra) £50
Metal braided fuel feed & return hoses, I.W./M.S.A approved (each) (2 or 3 equired) £15
Calorifer connections £10
Water feed for Deep Sea seal £10
Certificate of conformity to Ford ISO9001 & Q1 specification F.O.C.
Flywheel mass ring £135
Electric stop assembly F.O.C.
Low pressure fuel pipes, to I.W. interim spec F.O.C.
P.T.O shaft or puley/pulley only F.O.C.
Dual station speed and shift connections £55
Keel connections and dry exhaust in lieu of heat exchanger F.O.C.
On board spares kit (including an appropriate manual)
Coastal kit £146
Cruising supplement £288
Blue water extras £670
 
Instrumentation and alarm options Instrumentation and alarm extras
Economy. 95mm round panel, with start/run switch and 3 warning lights, wired to engine senors with 4m harness and connected to alarm

£130

Dayboat. "Economy" package plus 4-function instrument reading temperature, oil pressure, battery volts and choice of fuel level or water level* with appropriate senders installed. 12v only.

£315

Sporting. "Dayboat" package plus tachometer, connected. 12v only.

£393

Big two. "Sporting" package set into a rectangular, black engraved panel. 12v only. £389
Cruising. Individual instruments with all the functions of the "sporting" package, set into a rectangular, black engraved panel

£402

4m extension to plug into standard wiring harness

£29

Boost pressure gauge, hose & connection, loose **

£37

Rudder angle indicator and sender, loose

£79

Engine hour meter, loose or in tachometer **

£37

* Surcharge for water tank sender, in lieu of fuel sender

£44

95mm round flybridge panel with 3 warning lights, re-start button and audible alarm, connected to 4m harness to go to main station

£123

Tachometer for flybridge

£79

Intake blockage sensing vacuum switch and L.E.D. to operate alarm

£40

** either may be substitued for fuel gauge & sender in "cruising" F.O.C.